Filter
Top Products
976 | sFlow
www.dell.com | support.dell.com
sFlow Show Commands
FTOS includes the following sFlow display commands:
• Show sFlow Globally on page 49
• Show sFlow on an Interface on page 50
• Show sFlow on a Line Card on page 50
Show sFlow Globally
Use the following command to view sFlow statistics:
Figure 47-2 is a sample output from the
show sflow command:
Figure 47-2. Command Example: show sflow
Show sFlow on an Interface
Use the following command to view sFlow information on a specific interface:
Figure 47-3 is a sample output from the
show sflow interface command.
Command Syntax Command Mode Purpose
show sflow EXEC Display sFlow configuration information and statistics.
Command Syntax Command Mode Purpose
show sflow interface
interface-name
EXEC Display sFlow configuration information and statistics on a
specific interface.
FTOS#show sflow
sFlow services are enabled
Global default sampling rate: 32768
Global default counter polling interval: 20
1 collectors configured
Collector IP addr: 133.33.33.53, Agent IP addr: 133.33.33.116, UDP port: 6343
77 UDP packets exported
0 UDP packets dropped
165 sFlow samples collected
69 sFlow samples dropped due to sub-sampling
Linecard 1 Port set 0 H/W sampling rate 8192
Gi 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1
Gi 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2
Indicates sFlow is globally enabled
Indicates sFlow is enabled on
linecards Gi 1/16 and Gi 1/17