Filter
Top Products
62 | System Management
www.dell.com | support.dell.com
Log Messages in the Logging Buffer
All error messages, except those beginning with %BOOTUP (Message 1), are log in the internal buffer.
Configuration Task List for System Log Management
The following list includes the configuration tasks for system log management:
• Disable System Logging on page 62
• Send System Messages to a Syslog Server on page 63
Disable System Logging
By default, logging is enabled and log messages are sent to the logging buffer, all terminal lines, console,
and syslog servers.
Enable and disable system logging using the following commands:
Message 1 BootUp Events
%BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled
Task Command Syntax Command Mode
Disable all logging except on the console.
no logging on
CONFIGURATION
Disable logging to the logging buffer.
no logging buffer
CONFIGURATION
Disable logging to terminal lines.
no logging monitor
CONFIGURATION
Disable console logging.
no logging console
CONFIGURATION