Filter
Top Products
674 | Multicast Features
www.dell.com | support.dell.com
Prevent an IPv6 Source from Registering with the RP
Prevent an IPv6 PIM Router from Processing an IPv6 Join
Multicast Traceroute
Multicast Traceroute is supported only on platform: e
MTRACE is an IGMP-based tool that prints that network path that a multicast packet takes from a source
to a destination, for a particular group. FTOS has mtrace client and mtrace transmit functionality.
• MTRACE Client—an mtrace client transmits mtrace queries and prints out the details received
responses.
Task Command Syntax Command Mode
Configured on the source DR, prevent the
source DR from sending register packets to the
RP for specific sources and groups.
ipv6 pim register-filter access-list
CONFIGURATION
FTOS(conf)#ipv6 pim register-filter REG-FIL_ACL
FTOS(conf)#ipv6 access-list REG-FIL_ACL
FTOS(conf-ipv6-acl)#deny ipv6 165:87:34::10/128 ff0e::225:1:2:0/112
FTOS(conf-ipv6-acl)#permit ipv6 any any
FTOS(conf-ipv6-acl)#exit
Task Command Syntax Command Mode
Permit or deny PIM Join/Prune messages on an
interface using an access list. This command
prevents the PIM-SM router from creating state
based on multicast source and/or group.
ipv6 pim join-filteraccess-list [in | out] INTERFACE
FTOS(conf)#ipv6 access-list JOIN-FIL_ACL
FTOS(conf-ipv6-acl)#permit ipv6 165:87:34::0/112 ff0e::225:1:2:0/112
FTOS(conf-ipv6-acl)#permit ipv6 any ff0e::230:1:2:0/112
FTOS(conf-ipv6-acl)#permit ipv6 165:87:32::0/112 any
FTOS(conf-ipv6-acl)#exit
FTOS(conf)#interface gigabitethernet 0/84
FTOS(conf-if-gi-0/84)#ipv6 pim join-filter JOIN-FIL_ACL in
FTOS(conf-if-gi-0/84)#ipv6 pim join-filter JOIN-FIL_ACL out