Filter
Top Products
Object Tracking | 687
Figure 31-7. Command Example: track ip route metric threshold
Figure 31-8. Command Example: track ipv6 route metric threshold
3 (Optional) Configure the time
delay used before communicating
a change in the UP and/or
DOWN status of a tracked route.
delay {[up seconds] [down seconds]}
Valid delay times are from 0 to 180 seconds. Default:
0.
OBJECT
TRACKING
4 (Optional) Identify the tracked
object with a text description.
description text
The text string can be up to 80 characters.
OBJECT
TRACKING
5 (Optional) Configure the metric
threshold for the UP and/or
DOWN routing status to be
tracked for the specified route.
threshold metric {[up number] [down number]}
Default UP threshold: 254. The routing state is UP if
the scaled route metric is less than or equal to the UP
threshold.
Default DOWN threshold: 255. The routing state is
DOWN if the scaled route metric is greater than or
equal to the DOWN threshold.
OBJECT
TRACKING
6 (Optional) Display the tracking
configuration.
show track object-id
EXEC Privilege
Step Task Command Syntax Command Mode
FTOS(conf)#track 6 ip route 2.1.1.0/24 metric threshold
FTOS(conf-track-6)#delay down 20
FTOS(conf-track-6)#delay up 20
FTOS(conf-track-6)#description track ip route metric
FTOS(conf-track-6)#threshold metric down 40
FTOS(conf-track-6)#threshold metric up 40
FTOS(conf-track-6)#exit
FTOS(conf)#track 10 ip route 3.1.1.0/24 metric threshold vrf vrf1
FTOS(conf)#track 8 ipv6 route 2::/64 metric threshold
FTOS(conf-track-8)#threshold metric up 30
FTOS(conf-track-8)#threshold metric down 40