Filter
Top Products
IP Access Control Lists (ACL), Prefix Lists, and Route-maps | 165
To configure a set condition, use any or all of the following commands in the ROUTE-MAP mode:
match ip address prefix-list-name CONFIG-ROUTE-MAP Match destination routes specified in a prefix list
(IPv4).
match ipv6 address prefix-list-name CONFIG-ROUTE-MAP Match destination routes specified in a prefix list
(IPv6).
match ip next-hop
{access-list-name | prefix-list
prefix-list-name}
CONFIG-ROUTE-MAP Match next-hop routes specified in a prefix list
(IPv4).
match ipv6 next-hop
{access-list-name | prefix-list
prefix-list-name}
CONFIG-ROUTE-MAP Match next-hop routes specified in a prefix list
(IPv6).
match ip route-source
{access-list-name | prefix-list
prefix-list-name}
CONFIG-ROUTE-MAP Match source routes specified in a prefix list
(IPv4).
match ipv6 route-source
{access-list-name | prefix-list
prefix-list-name}
CONFIG-ROUTE-MAP Match source routes specified in a prefix list
(IPv6).
match metric metric-value CONFIG-ROUTE-MAP Match routes with a specific value.
match origin {egp | igp |
incomplete}
CONFIG-ROUTE-MAP Match BGP routes based on the ORIGIN attribute.
match route-type {external
[type-1 | type-2] | internal | level-1
| level-2
| local }
CONFIG-ROUTE-MAP Match routes specified as internal or external to
OSPF, ISIS level-1, ISIS level-2, or locally
generated.
match tag tag-value CONFIG-ROUTE-MAP Match routes with a specific tag.
Command Syntax Command Mode Purpose
set as-path prepend as-number [...
as-number]
CONFIG-ROUTE-MAP Add an AS-PATH number to the beginning of
the AS-PATH
set automatic-tag
CONFIG-ROUTE-MAP Generate a tag to be added to redistributed
routes.
set level {backbone | level-1 | level-1-2
| level-2 | stub-area }
CONFIG-ROUTE-MAP Specify an OSPF area or ISIS level for
redistributed routes.
set local-preference value CONFIG-ROUTE-MAP Specify a value for the BGP route’s
LOCAL_PREF attribute.
set metric {+ | - | metric-value} CONFIG-ROUTE-MAP Specify a value for redistributed routes.
set metric-type {external | internal |
type-1 | type-2}
CONFIG-ROUTE-MAP Specify an OSPF or ISIS type for redistributed
routes.
set next-hop ip-address CONFIG-ROUTE-MAP Assign an IP address as the route’s next hop.
Command Syntax Command Mode Purpose