Filter
Top Products
System Time and Date | 1083
start-year: Enter a four-digit number as the year.
Range: 1993 to 2035
start-time: Enter the time in hours:minutes. For the hour
variable, use the 24-hour format, example, 17:15 is 5:15 pm.
end-week: If you entered a start-week, Enter the one of
the following as the week that daylight savings ends:
•
week-number: enter a number from 1-4 as the number of
the week to end daylight savings time.
•
first: enter the keyword first to end daylight savings time
in the first week of the month.
•
last: enter the keyword last to end daylight savings time in
the last week of the month.
end-month: Enter the name of one of the 12 months in
English.
You can enter the name of a day to change the order of the
display to time day month year.
end-day: Enter the number of the day.
Range: 1 to 31.
You can enter the name of a month to change the order of the
display to
time day month year.
end-year: Enter a four-digit number as the year.
Range: 1993 to 2035.
end-time: Enter the time in hours:minutes. For the hour
variable, use the 24-hour format, example, 17:15 is 5:15 pm.
offset: (OPTIONAL) Enter the number of minutes to add
during the summer-time period.
Range: 1 to1440.
Default: 60 minutes
Note: If you enter <CR> after entering the recurring command parameter, and you have already set a one-time daylight
saving time/date, the system will use that time and date as the recurring setting.
Command Syntax Command Mode Purpose
FTOS(conf)#clock summer-time pacific recurring Mar 14 2009 00:00 Nov 7 2009 00:00 ?
FTOS(conf)#02:02:13: %RPM0-P:CP %CLOCK-6-TIME CHANGE: Summertime configuration changed from
"none" to "Summer time starts 00:00:00 Pacific Sat Mar 14 2009;Summer time ends 00:00:00 pacific
Sat Nov 7 2009"