Filter
Top Products
1186 | C-Series Debugging and Diagnostics
www.dell.com | support.dell.com
Figure 60-15. show diag linecard Command Example
Use the show file flash:/filename view the detailed test results in the test report saved to flash memory on the
RPM. Use the command. Figure 60-16 shows the filename of the test results, and Figure 60-16 shows the
contents of the file.
Note: Report any test failures to your Dell Force10 technical support engineer.
FTOS#show diag linecard 5
Diag status of Linecard slot 5:
-------------------------------------------------------------
Card is currently offline.
Card alllevels diag issued at THU FEB 08, 2018 04:10:06 PM.
Current diag status: Card diags are in progress.
--------------------------------------------------------------
00:54:19 : Diagnostic test results are stored on file: flash:/TestReport
-LC-5.txt
00:54:19: %EX4PB:5 %DIAGAGT-6-DA_DIAG_DONE: Diags finished on slot 5
FTOS#