Filter
Top Products
Interfaces | 425
Displaying Information on a Management Interface
To view information about the primary RPM management port, use the show interface
Managementethernet
command in EXEC or EXEC Privilege mode. If there are two RPMs on the system,
you cannot view information on the interface.
Figure 20-9. Command Example: show interface ManagementEthernet
To view summary information about the primary RPM Management port, use the show ip interface brief
Managementethernet or show ipv6 interface brief Managementethernet commands in EXEC or EXEC
Privilege mode.
Figure 20-10. Command Example: show ip interface brief ManagementEthernet
Figure 20-11. Command Example: show ipv6 interface brief ManagementEthernet
FTOS>show interface managementethernet 0/0
ManagementEthernet 0/0 is up, line protocol is up
Hardware is Force10Eth, address is 00:01:e8:5d:b7:4c
Current address is 00:01:e8:5d:b7:4c
Pluggable media not present
Interface index is 503595208
Internet address is 10.11.197.97/16
Link local IPv6 address: fe80::201:e8ff:fe5d:b74c/64
Global IPv6 address: fdaa:bbbb:cccc:1004::50/64
Virtual-IP address is 10.11.197.99/16
Virtual-IP IPv6 address is fdaa:bbbb:cccc:1004::60/64
FTOS# show running-config interface managementethernet 0/0
interface ManagementEthernet 0/0
ip address 10.11.197.97/16
ipv6 address fdaa:bbbb:cccc:1004::50/64
!virtual-ip 10.11.197.99/16
!virtual-ip fdaa:bbbb:cccc:1004::60/64
no shutdown
FTOS>show ip interface brief managementethernet 0/0
Interface IP-Address OK Method Status Protocol
ManagementEthernet 0/0 10.11.197.97 YES Manual up up
FTOS#show ipv6 interface brief managementethernet 0/0
ManagementEthernet 0/0 [up/up]
fe80::201:e8ff:fe5d:b74c
fdaa:bbbb:cccc:1004::50/64