Filter
Top Products
Backup
Using Backup Options
Chapter 5236
Changing the owner works only for saved backup specifications. If the
backup configuration is changed and not saved, the backup is treated as
an interactive backup and the owner is not changed. This could result in
a different kind of backup than expected. For example, if you
interactively start an incremental backup and you are not the owner of
the full backup, you will get another full backup instead of an
incremental one.
List of Data Protector Backup Options
This section describes three sets of backup options. The options are
ordered alphabetically within each set.
Backup Specification Options
Setting Options for
a Backup
Specification
1. Select the backup specification whose options you want to set.
2. Click the Options tab.
3. Under Backup Specification Options, click Advanced. The Backup
Options window appears.
4. Select the options for General, Other, and Clustering. The EMC and
the StorageWorks tabs appear only if you have the respective devices
connected and configured.
Ignore Clustering if you do not have the MC/Service Guard or the
Microsoft Cluster Server installed and configured.
5. Click OK to confirm and exit the Backup Options window. Refer to
online Help for details.