Filter
Top Products
Disaster Recovery
Manual Disaster Recovery of an HP-UX Client
Chapter 10500
core.cfg to archive_<name>.cfg:
cp /opt/ignite/data/examples/core.cfg
/var/opt/ignite/data/<OS_Release>/archive_<name>.cfg
Example cp /opt/ignite/data/examples/core.cfg
/var/opt/ignite/data/Rel_B.11.11/archive_HPUX11_11_DP50_C
L.cfg
5. Check and change the following parameters in the copied
configuration file:
•In the sw_source section:
load_order = 0
source_format = archive
source_type="NET"
# change_media=FALSE
post_load_script = "/opt/ignite/data/scripts/os_arch_post_l"
post_config_script =
"/opt/ignite/data/scripts/os_arch_post_c"
nfs_source = "<IP Target System>:<Full Path>”
• In the matching OS archive section:
archive_path = "<archive_name>.gz
6. Determine the “impacts” entries by running the command
archive_impact on your image file and copy the output in the same
“OS archive” section of your configuration file:
/opt/ignite/lbin/archive_impact –t –g
<archive_name>.gz
Example
/opt/ignite/lbin/archive_impact –t –g
/image/archive_HPUX11_11_DP50_CL.gz
impacts = "/" 506Kb
impacts = "/.root" 32Kb
impacts = "/dev" 12Kb
impacts = "/etc" 26275Kb
impacts = "/opt" 827022Kb
impacts = "/sbin" 35124Kb