Filter
Top Products
Monitoring, Reporting, Notifications, and the Event Log
Data Protector Notifications
Chapter 7 349
7. In the Profile Name text box, enter OmniBack, and then click Next.
The Microsoft Exchange Server page appears.
8. In the Microsoft Exchange Server text box, enter the name of the
server.
9. In the Mailbox text box, enter the name that you want to appear in
email messages. This is usually Data Protector or the administrator’s
name.
10.The remaining information is optional. Follow the on-screen
instructions, and then click Finish to complete the wizard. You will
then have a new MS Exchange profile for Data Protector.
Broadcast Message Send Method
Broadcast message notifications allow you to send a broadcast message
to systems when a specified event occurs.
Broadcast messages can be sent to Windows systems only, by specifying
the system to which the broadcast message should be sent. Broadcast
messages are limited in length, so the short format is preferred. The
reports are limited to 1000 characters.
Log to File Send Method
Log to file notifications allow you to post a log file with desired
information when a specified event occurs.
The log file is posted to the Cell Manager system. Specify the name of the
file to which you want to post the report.
SNMP Send Method
SNMP traps notifications allow you to send an SNMP trap with desired
information when a specified event occurs. The SNMP trap can be
further processed by applications using SNMP traps.
NOTE On a UNIX Cell Manager, SNMP traps are sent to the systems
configured in the notification.
On a Windows Cell Manager, SNMP traps are sent to the systems
configured in the Windows SNMP traps configuration.