Filter
Top Products
Integrations with Other Applications
Novell NetWare Cluster Integration
Chapter 13642
Novell NetWare Cluster Integration
Clients on Novell NetWare Cluster
Data Protector can only be used to back up local disks or cluster shared
pools in a Novell NetWare Cluster environment.
Cluster aware operation is not supported for Data Protector with Novell
NetWare Clusters. In case of failover, backup or restore sessions have to
be restarted manually.
Installation Data Protector has to be installed locally on each client, and each client
has to be imported to the cell. See the HP OpenView Storage Data
Protector Installation and Licensing Guide for step-by-step instructions.
To configure Novell NetWare Cluster with Data Protector, you need the
Data Protector user interface.
Refer to the following for more information:
• Novell NetWare Cluster documentation.
• HP OpenView Storage Data Protector Installation and Licensing
Guide for more information on how to install Data Protector.
• HP OpenView Storage Data Protector Software Release Notes for last
minute information on the current Data Protector release.
Configuration
To be able to back up local disks on cluster nodes, the individual nodes
have to be imported into the Data Protector cell. To be able to back up
cluster shared pools, virtual server has to be imported into the cell as
well.
Backing Up Local Disks
Disks local to the systems in the cluster are visible when you browse a
system where a disk is locally connected.
To back up local disks:
1. Install the Data Protector Disk Agent on each system with the local
disk you want to back up.