Filter
Top Products
G-38
Glossary
split mirror backup (HP StorageWorks
Disk Array XP specific term)
See ZDB tape backup, ZDB disk/tape
backup and ZDB disk backup.
split mirror restore (HP StorageWorks
Disk Array XP specific term)
A process where data backed up using
the ZDB tape backup or ZDB disk/tape
backup process is restored from tape
media to the replica storage version
selected by the replica rotation process
or by the user. The replica storage
version is then synchronized to the
original storage. Split mirror restore is
limited to filesystem restore.
See also ZDB tape backup, ZDB disk/
tape backup, and replica storage
rotation.
sqlhosts file (Informix specific term)
An Informix connectivity-information
file that contains the names of each of
the database servers and any aliases to
which the clients on a host computer can
connect.
SRD file
The Data Protector System Recovery
Data (SRD) file contains system
information required for installing and
configuring the operating system in case
of a disaster. The SRD file is an ASCII
file, generated when a
CONFIGURATION backup is
performed on a Windows client and
stored on the Cell Manager.
SRDF (EMC Symmetrix specific term)
The EMC Symmetrix Remote Data
Facility is a business continuation
process that enables effective, real-time
data replication of SLDs between
dislocated processing environments.
These environments could be situated
within the same root computer
environment or separated by long
distances.
SSE Agent (HP StorageWorks Disk
Array XP specific term)
A Data Protector software module that
executes all tasks required for a split
mirror backup integration. It
communicates with the HP
StorageWorks Disk Array XP storing
system using the RAID Manager XP
utility (HP-UX and Windows systems)
or RAID Manager Library (Solaris
systems).
sst.conf file
The file /usr/kernel/drv/sst.conf is
required on each Data Protector Sun
Solaris client to which a multi-drive
library device is connected. It must
contain an entry for the SCSI address of
the robotic mechanism of each library
device connected to the client.
st.conf file
The file /kernel/drv/st.conf is required
on each Data Protector Solaris client
with a backup device connected. It must
contain device information and a SCSI