A SERVICE OF

logo

Integrations with Other Applications
MC/ServiceGuard Integration
Chapter 13 637
f. Import the cluster package host name manually (for example, by
using the omnicc command):
omnicc -import_host <virtual_hostname> -virtual
g. If the Data Protector Installation Server was also installed on the
MC/ServiceGuard (default), you have to import this Installation
Server (for example, by using the omnicc command):
omnicc -import_is <virtual_hostname>
h. In order to run the Data Protector graphical user interface on the
secondary node, you have to open the Data Protector graphical
user interface and add the root user of the secondary node to the
admin user group. Refer to “Adding or Deleting a User” on page 90.
Clients on MC/ServiceGuard
Data Protector can back up a full cluster (local and shared disks) and
applications running in a cluster environment.
Installation
To back up a cluster-aware application, the Data Protector client must be
installed locally on all the cluster nodes. See the HP OpenView Storage
Data Protector Installation and Licensing Guide for information on how
to install a cluster-aware client.
Configuration
You need to import the application cluster package to the cell.
If the Cell Manager and the application are in the same cluster, you need
to move the Cell Manager package to the application node before
importing the application cluster package. Proceed as follows:
1. Stop the Cell Manager package (for example ob2cl):
cmhaltpkg ob2cl
2. Run the Cell Manager package on the application node:
cmrunpkg -n <node_name> ob2cl