Filter
Top Products
ADIC/GRAU DAS and STK ACS Libraries
Troubleshooting Library Installation and Configuration
Chapter 14698
(or: dasadmin dismount -d <DRIVENAME>)
where <AMUCLIENT> = DATA_PROTECTOR
and <VOLSER> for example = 001565
and <DRIVENAME> is for example = DLT7001
and "all" stands for "allocate"
If you are not successful with these commands (communication to DAS
Server (OS/2), try to execute these commands on the OS/2 PC. You can
find the dasadmin command in/das/bin/.
If you execute theses commands from the OS/2 PC, use <AMUCLIENT> =
AMUCLIENT.
1. Login to the AMU client. The common login are the following:
user: Administrator pwd: administrator
user: Supervisor pwd: supervisor
2. It may be necessary to set the media type:
set ACI_MEDIA_TYPE set ACI_MEDIA_TYPE=DECDLT
3. To reboot the library, proceed as follows:
Shutdown OS/2 and then switch off robotics.
Restart OS/2 and when OS/2 is ready, the AMU log will display that
the robotics is not ready. Then, switch on robotics.
How to Configure
GRAU CAPs?
You can only move media from the CAP to a slot and then to a drive,
using the device’s robotics. You have to use import and export
commands. For example:
import CAP: I01
import CAP range: I01-I03
export CAP: E01
export CAP range: E01-E03
How to Use uma
Utility?
The following syntax is used when you use the Data Protector uma utility
to manage the GRAU and STK library drives:
uma -pol 8 -ioctl grauamu
pol 8 for GRAU