Filter
Top Products
Disaster Recovery
Manual Disaster Recovery of an HP-UX Client
Chapter 10 501
impacts = "/stand" 1116Kb
impacts = "/tcadm" 1Kb
impacts = "/usr" 729579Kb
impacts = "/var" 254639Kb
7. To make Ignite-UX aware of the new created depot, add an cfg entry
to the /var/opt/ignite/INDEX file with the following layout:
cfg "<This_configuration_name>" {
description "<Description of this configuration>”
"/opt/ignite/data/<OS>/config"
"/var/opt/ignite/data/<OS>/ archive_<name>.cfg
}
Example cfg "HPUX11_11_DP50_Client" {
description "HPUX 11.i OS incl Patches and DP50 Client"
"/opt/ignite/data/Rel_B.11.11/config"
"/var/opt/ignite/data/Rel_B.11.11/archive_HPUX11_11_DP50_CL.cfg
"
}
8. Make sure that one or more IP addresses reserved for booting clients
are configured in the /etc/opt/ignite/instl_boottab file. The
number of IP addresses is equal to the number of parallel booting
clients.
After the above described procedure is completed, you have a Golden
Image of an HP-UX client (with a specific hardware and software
configuration), which can be used to recover any client of a similar
layout.
You have to repeat these steps to create a Golden Image for all systems
with different hardware and software configuration.