Filter
Top Products
ADIC/GRAU DAS and STK ACS Libraries
The ADIC/GRAU DAS Library Device
Chapter 14664
NOTE This applies to HP-UX and Windows.
For further questions on the configuration of your GRAU library
please contact your local GRAU support or review your GRAU
documentation.
Installing the DAS Media Agent
Data Protector provides a dedicated ADIC/GRAU library policy used to
configure an ADIC/GRAU library with Data Protector. You have to
install the Data Protector DAS Agent component on every system that
will be physically connected to a drive in the ADIC/GRAU library.
NOTE You need special licenses, depending on the number of drives and slots
used in the ADIC/GRAU library. See “Data Protector Licensing” in the
HP OpenView Storage Data Protector Installation and Licensing Guide
for more information.
DAS Agent includes standard Media Agent functionality, thus the Media
Agent must not be installed over an existing DAS Agent.
Installing the DAS Media Agent on a Windows System
Prerequisites The following prerequisites for installation have to be met before
installing DAS Agent on a Windows system:
• The ADIC/GRAU library has to be configured and running. See the
documentation that comes with the ADIC/GRAU library.
• Data Protector has to be installed and configured. See “Installing the
Cell Manager (CM) and Installation Server (IS)” in the HP OpenView
Storage Data Protector Installation and Licensing Guide for more
information.
• The following information has to be obtained before you install DAS
Agent:
✓ A hostname of the DAS Server (an application that runs on OS/2
host).