Filter
Top Products
Backup
Using Backup Options
Chapter 5 239
See “Pre- and Post- Exec Commands on Windows Systems” on page 251
for details of specifying post-exec commands on Windows.
See “Pre- and Post- Exec Commands on UNIX Systems” on page 257 for
details of specifying pre-exec commands on UNIX.
See Appendix, “Examples of Pre-Exec and Post-Exec Commands for
UNIX,” on page A-20 for some sample scripts on UNIX.
Default value is not specified.
Reconnect Broken Connections
When this option is set, Data Protector reconnects the Backup Session
Manager and Disk Agents or Media Agents in the event of short-term
network problems. Otherwise, the session is aborted.
This setting is useful if you have the Cell Manager on one LAN and Disk
Agents or Media Agents on another. Assuming that the connection
between these two LANs is unreliable (WAN connections), Data
Protector tries to reconnect for 1200 seconds. This can be set in the
omnirc variable OB2RECONNECT_RETRY.
The default value is OFF.
Object Options
Setting the
Filesystem
Options
1. Select the backup specification and from the Options property page,
under Filesystem Options, click Advanced.
2. Select the options to be set from the Options, Other, WinFS
Options, or Netware Options tabs.
NOTE On the Options tab, if specifying Pre- and/or Post- exec command names,
you may or may not have to specify the full paths for the commands.
See “Pre- and Post- Exec Commands on Windows Systems” on page 251
for details of specifying pre-exec commands on Windows.
See “Pre- and Post- Exec Commands on UNIX Systems” on page 257 for
details of specifying pre-exec commands on UNIX.
3. Click OK to confirm and exit this dialog box.
See online Help for specific help on each option.