Filter
Top Products
3-30 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.21 Button in the [Fans] window
(1) Menu operation
[System] → [Fans]
(2) GUI operation
1 Click the [Status Clear] button.
The [Fans Status Clear] window is displayed.
2 Follow the clearing process in the [Fans Status Clear] window.
The fan statuses are cleared.
3.2.9.1 Fans Status Clear window
Once an abnormality is detected in a fan, the fan remains in the abnormal status until
the fan is replaced or the abnormal status is cleared.
The abnormal status of a fan can be cleared using the [Fans Status Clear] window.
Note: After the abnormal status of a fan is cleared, if an abnormal fan speed is
detected in the fan, the fan is placed in the [Failed] status again. Clearing the
status of a fan with an abnormal fan speed does not change its status from
[Failed].
Status Fan status:
• OK: Operating normally
• Not present: Not installed
• Failed: Fan failure
Fan Speed(rpm) Fan speed (rpm).
Threshold(rpm) Lower limit of the fan speed (Any speed lower than this setting is
abnormal.)
Button Description
Status Clear Click the [Status Clear] button to display the [Fans Status Clear]
window. This window enables clearing of the fan statuses.
Item Description