Filter
Top Products
8-208 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.4.5 show ip
This command displays the IP host information and status and default gateway
information.
The same information is displayed by the following commands:
z show ip host (See Section 8.3.4.7, "show ip host.")
z show ip default-gateway (See Section 8.3.4.6, "show ip default-gateway.")
z show ip socket (See Section 8.3.4.8, "show ip socket.")
z show arp (See Section 8.3.4.4, "show arp.")
(1) Synopsis
(2) Options
None
(3) Command mode
user exec
enabled exec
show ip