Filter
Top Products
C122-E003-02EN 8-159
GSWB
8.3 Operation Commands
• Acquires an online file after connecting to the tftp server.
The tftp connection is terminated after the file is acquired.
(6) Error Messages
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Parameter error
Cause: An invalid parameter was entered.
Action: Enter the command string correctly.
• Command is already running.
Cause: The following commands are currently running.
clear ramdisk / install / restore config / save config / tftp
Action: Reenter the command after the current command exits.
• tftp: sendto: *
Cause: Data transmission to the tftp server failed.
Action: Check the status of the network connection to the tftp server.
• tftp: recvfrom: *
Cause: Data reception from the tftp server failed.
Action: Check the status of the network connection to the tftp server.
• Transfer timed out.
Cause: The tftp server has not started at the connected host. Alternatively,
connection is not allowed. Another possibility is that file transfer is not
possible due to a connection error.
Action: Check the connection to the tftp server. Use the [show ether statistics]
command to check for possible errors.
Check the interface settings of the business LAN.
switch#tftp 10.10.10.10
tftp> get online
Received 12386112 bytes in 541.1 seconds
tftp> q
switch#