Filter
Top Products
8-104 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(3) Command mode
Interface
(4) See also
None
(5) Examples
• Sets the port speed of GigabitEthernet 0/1 to 100 Mbps
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
Switch(config)# interface GigabitEthernet 0/1
Switch(config-if)# speed 100
Switch(config-if)#