Filter
Top Products
C122-E003-02EN 3-39
MMB
3.2 System Menu
Table 3.26 Button in the [SB#x] window
(1) Menu operation
[System] → [SB] → [SB#x]
(2) GUI operation
• Clearing the error status of a component on which an error has been detected
1 Click the [Status Clear] button.
The [SB#x Status Clear] window is displayed.
2 The [SB#x Status Clear] window enables clearing of the error status of a
component whose failure was detected.
Use of this component is attempted at reboot.
3.2.11.2 SB#x Status Clear window
Once an abnormality is detected in a component, the component remains in the
abnormal status until the status is cleared.
The [SB#x Status Clear] window allows you to clear the error status of a component
on which an abnormality has been detected. Radio buttons are provided to ensure that
you can specify whether to clear all error statuses on the SB at the same time or clear
the error status of individual components.
Note: Clearing the abnormal status of a component enables its use during the next
reboot. If an error is detected again, the component is placed back in the
error status.
Button Description
Status Clear Click the [Status Clear] button to display the [SB#x Status Clear]
window. This window enables clearing of the error status of an SB
component whose failure was detected.
This enables using of the component again at the next reboot.