Filter
Top Products
C122-E003-02EN 8-191
GSWB
8.3 Operation Commands
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.3.3 show interface switchport
This command displays interface settings.
When the interface is in access mode, the access vlan id is displayed in Allowed
VLAN and Native VLAN.
(1) Synopsis
(2) Options
z <interface-id>: Specifies the interface whose settings are to be displayed.
- GigabitEthernet 0/1-8
- IO_Unit 0 0-7 1
- TenGigabitEthernet 1/1-2
- port-channel 1-7
- port 1-33
(3) Command Mode
user exec
enabled exec
(4) See also
show vlan
show wrr-queue cos-map
show interface switchport <interface-id>