Fujitsu 440 Laptop User Manual


 
7-50 C122-E003-02EN
GSWB
CHAPTER 7 Web-UI Operations
Table 7.54 Displayed and setting items in the [Remote Access] window
Table 7.55 Buttons in the [Remote Access] window
(1) Menu operation
[Switch] [GSWB#x] [Management] [Remote Access]
(2) GUI operation
Setting
1 Select the protocol that is responsible for permitting access and the IP address
or network address specification method.
2 If you select [Host] for [IP Address], specify the host address in the address
field. If you select [Network], specify the network address and subnet mask.
3 Click the [Apply] button.
Item Description
Protocol Protocol
IP Address IP address
Subnet Mask Subnet mask
Delete To delete a setting, check its check box.
Add the New Entry
Protocol Specify a protocol:
All: Specifies all protocols.
telnet: Specifies telnet.
ssh: Specifies ssh.
IP Address Specify an IP address:
All: Specifies all IP addresses.
Host: Specify host addresses to be permitted.
Network: Specify network addresses to be permitted.
If you select Host or Network, specify the IP or network
addresses that are permitted for remote connection, in the range
from 0 to 255.
Subnet Mask If a specific host IP address is specified in [IP address], no subnet
mask need be specified. A subnet mask is required for a specific
network. Octet range: 0 to 255
Button Description
Help Displays the Help window.
Apply Sets the specified values.
Cancel Closes the window without saving the change.