Filter
Top Products
6-4 C122-E003-02EN
PSA
CHAPTER 6 CLI Operations
- If you start PSA during SAF-TE operation command execution, PSA
will not work normally. Start PSA after the command ends its
processing.
For information on the operating procedure, see the PRIMEQUEST
480/440 Operation Manual (C122-E002).
(1) Synopsis
(2) Options
[-l|-e|-i|-o|-c]
-l: Status display
Displays each SAF-TE unit and its subordinate HDDs recognized by the OS
in a list.
-e: Power-off instruction
Turns off power to the HDD specified in [Devicename] or the slot of the
SAF-TE unit specified in [/dev/sgx/slotno], and turns on the fault LED.
-i: Location display
Initiates blinking of the fault LED for the HDD specified in [Devicename] or
the slot of the SAF-TE unit specified in [/dev/sgx/slotno].
-o: Location turnoff
Turns off the fault LED for the HDD specified in [Devicename] or the slot of
the SAF-TE unit specified in [/dev/sgx/slotno].
-c: Power-on command
Turns on power to the HDD specified in [Devicename] or the slot of the
SAF-TE unit specified in [/dev/sgx/slotno].
kernel: Device sdb not ready.
kernel: end_request: I/O error, dev sdb, sector 204706
kernel: Buffer I/O error on device sdb1, logical block
6396
/opt/FJSVpsa/bin/diskctrl [-l|-e|-i|-o|-c] [Devicename|/dev/sgx/slotno]