Filter
Top Products
C122-E003-02EN 7-13
GSWB
7.3 Configuration Copy Menu
Table 7.14 Displayed or setting item in the [Configuration Copy] window
Table 7.15 Buttons in the [Configuration Copy] window
(1) Menu operation
[Switch] → [Configuration Copy]
(2) GUI operation
• Copying
1 Select the copy source GSWB and copy destination GSWB from [Select the
direction of copy], and specify the ID of the configuration definition file to be
copied in [Select the configuration file ID].
Since two GSWB configuration definitions (config0 and config1) can be
saved, select which configuration definition file on the GSWB to copy.
2 Click the [Apply] button.
Note:
- Before the switching operation can be performed based on the copied
configuration definition file, you need to change the configuration in
the [Active Image Change] window so that the configuration file is
used at the time of startup, and then restart the GSWB.
- After the configuration definition file is copied, the specified
configuration definition file comment will be "configuration copy."
- [Copy Source] is not selected on the initial display.
Item Description
Select the direction of copy
Copy from GSWB#0
to GSWB#1
Copies settings from GSWB#0 to GSWB#1.
Copy from GSWB#1
to GSWB#0
Copies settings from GSWB#1 to GSWB#0.
Select the configuration file ID
config 0 config0 copies config 0
config 1 config1 copies config 1
Button Description
Help Displays the Help window.
Apply Sets the specified value.
Cancel Closes the window without saving the change.