Filter
Top Products
8-262 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
z IP Address: IP address or the network address to which a connection can be
established
z Netmask: Subnet mask when a network address is specified in an IP address
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.9.2 show storm-control
This command displays information on broadcast/multicast/DLF storm control in
units and interfaces (ports).
If the parameter is omitted, information about all interfaces is displayed.
(1) Synopsis
(2) Options
z <interface-id> (optional): Specifies the interface whose information is to be
displayed.
- IO_Unit 0 0-7 1
- GigabitEthernet 0/1-8
- port 1-24
If this parameter is omitted, information about all interfaces is displayed.
show storm-control [<interface-id>]