Filter
Top Products
C122-E003-02EN 8-99
GSWB
8.2 Configuration Definition Commands
(2) Options
z <interface-id>
Specifies the destination interface (GigabitEthernet 0/1 to 0/8, IO_Units 00 to 71,
TenGigabitEthernet 1/1 to 1/2, ports 1 to 26).
(3) Command mode
Global
(4) See also
monitor session source
(5) Examples
• Sets GigabitEthernet 0/1 as the mirror port
• Deletes GigabitEthernet 0/1 as the mirror port
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
Switch(config)# monitor destination interface GigabitEthernet 0/1
Switch(config)#
Switch(config)# show monitor destination
monitor destination interface GigabitEthernet 0/1
Switch(config)#
Switch(config)# no monitor session destination
Switch(config)#
Switch(config)#show monitor session destination
no monitor session destination
Switch(config)#