Filter
Top Products
C122-E003-02EN 8-93
GSWB
8.2 Configuration Definition Commands
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.
8.2.12.4 ip igmp snooping vlan static
This command adds a layer-2 port to a multicast group:
z If a channel group is specified in <interface-id>, the anchor port is added to the
multicast group.
z The maximum number of registered multicast groups, which consist of
dynamically registered groups and groups registered statically by commands, is
252.
z If the MAC address table has no free space, no multicast group can be registered.
(1) Synopsis
• Adds a layer-2 port to a multicast group
• Deletes a layer-2 port from a multicast group
(2) Options
z <mac-address>
Specifies a static group MAC address.
z <interface-id>
Specifies the interface and port number (GigabitEthernet 0/1 to 0/8, IO_Units 00 to
71, TenGigabitEthernet 1/1 to 1/2, port-channels 1 to 7, and ports 1 to 33) of the port
to be added to a multicast group.
(3) Command mode
VLAN configuration mode
(4) See also
ip igmp snooping
ip igmp snooping vlan static <mac-address> interface <interface-id>
no ip igmp snooping vlan static <mac-address> interface <interface-id>