Filter
Top Products
8-300 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.11.4 show ip igmp snooping statistics
This command displays statistical information on IGMPSnooping.
The number of received packets is displayed only for a VLAN for which
IGMPSnooping is enabled. If IGMPSnooping is disabled for the whole unit, the
number of received packets is not displayed for any VLAN.
(1) Synopsis
(2) Options
z vlan <vlan-id> (optional)
Specifies the VLAN ID whose statistical information is to be displayed.
If this parameter is omitted, statistical information on all VLANs defined on the
switch is displayed.
(3) Command mode
enabled exec
user exec
show ip igmp snooping statistics [vlan <vlan-id>]