Filter
Top Products
C122-E003-02EN 3-151
MMB
3.5 Network Configuration Menu
Table 3.119 Buttons in the [Alarm Email Filtering Condition] window
(1) Menu operation
[Network Configuration] → [Alarm Email] → [Filter]
(2) GUI operation
1 Specify values in [Severity], [Partition], [Unit], etc., and click the [Apply]
button.
The specified filtering conditions are then set.
Unit Select a target unit for event filtering.
Select either [All] or [Specified] by clicking its radio button.
Selecting [All] disables event filtering based on units.
Selecting [Specified] enables event filtering based on units and
checking of check boxes, so a unit can be selected for event
filtering.
The default setting is [All].
Source Select a target source for event filtering.
Select either [All] or [Specified] by clicking its radio button.
Selecting [All] disables event filtering based on sources.
Selecting [Specified] enables event filtering based on sources and
checking of check boxes, so a source can be selected for event
filtering.
The default setting is [All].
Button Description
Apply Specify values in [Severity], [Partition], [Unit], etc., and click the
[Apply] button to set the specified filtering conditions.
Cancel Click the [Cancel] button to revert to the original settings in
filtering conditions such as [Severity], [Partition], and [Unit].
Item Description