Filter
Top Products
3-58 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.35 Displayed and setting items in the [CPCB] window
Table 3.36 Button in the [CPCB] window
Item Description
Board Information
Status CPCB status:
• OK: Operating normally
• Not present: Not installed
• Degraded: Component failure.
• Failed: Failure
Power Status CPCB power status:
• On: Powered on
• Standby: Standby mode
Part Number CPCB part number
Serial Number CPCB serial number
Location LED Location LED status
The three light statuses are as follows:
• On: Currently lit
• Off: Currently not lit
• Blink: Currently blinking
The LED can be turned on, turned off, or set to blink by clicking a
radio button.
Vo l t a g e
Sensor Voltage sensor type
Vo l t a g e Current voltage reading
Threshold Warning
(Low/High)
Lower and upper limits of the warning-level voltage. If no limit is
set, "-" is displayed.
Critical
(Low/High)
Lower and upper limits of the critical-level voltage. If no limit is
set, "-" is displayed.
Clock
Clock#0 to Clock#1 System clock status:
• OK: Operating normally
• Failed: Failure
Button Description
Status Clear Clears the error status of the CPCB and attempts to use the CPCB
at the next reboot.
Reference: You can clear the CPCB error status and specify that
the CPCB be reused at the next reboot. If an error is
detected again during reboot, the CPCB will be placed
again in an error status.