Filter
Top Products
7-76 C122-E003-02EN
GSWB
CHAPTER 7 Web-UI Operations
Table 7.77 Buttons in the [MAC Address Table] window
(1) Menu operation
[Switch] → [GSWB#x] → [MAC Bridge] → [MAC Address Table]
(2) GUI operation
• Display
1 Specify the search conditions. Multiple search conditions cannot be
specified.
2 Click the [Query] button.
3 Only entries that matched the search conditions are displayed.
• Clearing
1 To clear dynamic MAC address entries, click the [Clear] button.
2 The confirmation window is displayed. Clicking the [OK] button clears the
dynamic entries.
3 All dynamic entries are cleared, regardless of the search conditions.
Interface Specify the interface (default: IO_Unit):
• IO_Unit (default): Specify an I/O unit (00 to 71). Default: 00
• GigabitEthernet: Specify GigabitEthernet (0/1 to 0/8).
• 10GigabitEthernet: Specify 10GigabitEthernet (1/1 to 1/2).
• port-channel: Specify a port-channel (1 to 7).
VLAN ID Specify a VLAN ID (1 to 4094).
MAC Address Specify the station MAC address (0x00 to 0xFF).
Status Specify the type of addresses to be displayed:
• Static (default): Displays static addresses only.
• Dynamic: Displays dynamic addresses only.
Chip Number Specify a chip number (1 to 4).
Button Description
Help Displays the Help window.
Query Displays search results after a search is completed.
Clear Clears dynamic entries. Static entries are not cleared.
Next If number of entries to be displayed exceeds 1024, clicking this
button displays the next 1024 entries. The [Next] button is
displayed only if there are still entries to be displayed after the
[Query] button is clicked.
Cancel Returns to the initial [MAC Address Table] window. This button
is displayed only after the [Query] button is clicked.
Item Description