Filter
Top Products
3-118 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
3.5.2 Network Interface window
The [Network Interface] window allows you to specify IP addresses and other
information for MMB access. In this window, you can specify the following three
types of IP addresses:
IP Address: Specify the virtual IP address to be used to access the Web-UI. If the
MMB is duplicated, this virtual IP address will be taken by the active MMB.
IP Address for MMB#0: This item is displayed and can be set if MMB#0 exists on the
system. Specify the physical IP address to be assigned to the MMB#0 interface. The
Web-UI is also accessible from this interface. If MMB#0 does not exist on the
system, this table is unselectable.
IP Address for MMB#1: This item is displayed and can be set if MMB#1 exists on the
system. Specify the physical IP address to be assigned to the MMB#1 interface. The
Web-UI is also accessible from this interface. If MMB#1 does not exist on the
system, this table is unselectable.
Figure 3.52 [Network Interface] window
Table 3.86 Displayed and setting items in the [Network Interface] window
Item Description
IP Address
Hostname Specify a host name. The default setting is the system name.
IP Address Specify an IP address.
Subnet mask Specify the subnet mask.