Filter
Top Products
C122-E003-02EN 8-89
GSWB
8.2 Configuration Definition Commands
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.
• igmp static exists.
Cause: The ip igmp snooping vlan static setting is enabled.
Action: Disable the ip igmp snooping vlan static setting, and reexecute the command.
8.2.12.2 ip igmp snooping vlan
This command enables IGMP snooping in a specific VLAN.
For snooping in the specified VLAN, not only must the ip igmp snooping vlan
command enable snooping in the specified VLAN, but snooping must also be enabled
by the ip igmp snooping command for the whole device.
Snooping can be enabled in up to 110 VLANs.
(1) Synopsis
• Enables IGMP snooping in a specific VLAN
• Disables IGMP snooping in a specific VLAN (default)
(2) Options
None
(3) Command mode
VLAN configuration mode
ip igmp snooping vlan
no ip igmp snooping vlan