Filter
Top Products
8-86 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
8.2.11.3 port-channel load-balance
This command specifies the method of load balancing among physical links in a
channel group.
The command can be used only for the "port-channel" interface type.
(1) Synopsis
• Specifies the method for load balancing among the physical links in a trunk group
• Resets the load balancing method to the default value
(2) Options
z {src-mac | dst-mac | src-dst-mac | src-ip | dst-ip | src-dst-ip}
Specifies the load balancing method.
- src-mac: Uses hash for the source MAC address.
- dst-mac: Uses hash for the destination MAC address.
- src-dst-mac (default): Uses hash for the source/destination MAC addresses.
- src-ip: Uses hash for the source IP address.
- dst-ip: Uses hash for the destination IP address.
- src-dst-ip: Uses hash for the source/destination IP addresses
(3) Command mode
Interface
(4) See also
channel-group
port-channel load-balance {src-mac | dst-mac | src-dst-mac |
src-ip | dst-ip | src-dst-ip}
no port-channel load-balance