Filter
Top Products
8-254 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.8.6 show logging line
This command displays the stored line log contents.
(1) Synopsis
(2) Options
z <interface-id>
Displays the line log of the specified interface. The following interfaces can be
specified:
- IOU 0 0-7 1
- GigabitEthernet0/1-8
- TenGigabitEthernet1/1-2
- port 1-35
If this parameter is omitted, the line log of all interfaces are displayed.
z tail: Displays the specified number of last log items.
- number: Specifies the number of log items to be displayed (1 to 1023).
(3) Command mode
enabled exec
(4) See also
clear logging line
show logging line [<interface-id>] [tail <number>]