Filter
Top Products
C122-E003-02EN 8-249
GSWB
8.3 Operation Commands
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.8.4 clear logging trap
This command deletes the stored trap log contents.
(1) Synopsis
(2) Options
None
(3) Command mode
enabled exec
(4) See also
show logging trap
(5) Examples
• Deletes all the stored trap log contents
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
clear logging trap
Switch# clear logging trap
Are you sure? [y/n]:y
Now perform...
Switch#