Fujitsu 440 Laptop User Manual


 
3-52 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
Table 3.31 Displayed and setting items in the [XAI#x] window
Item Description
Board Information
Status XAI board status:
OK: Operating normally
Not present: Not installed
Degraded: Component failure. (The faulty component can be
isolated to continue operation.)
Failed: Failure
Power Status XAI board power status:
On: Powered on
Standby: Standby mode
Part Number XAI board part number
Serial Number XAI board serial number
Location LED Location LED status
The three light statuses are as follows:
On: Currently lit
Off: Currently not lit
Blink: Currently blinking
The LED can be turned on, turned off, or set to blink by clicking a
radio button.
Chipsets
GAC GAC status:
OK: Operating normally
Warning: Operating but requires maintenance (contact a
certified service engineer).
Failed: Failure
DC-to-DC Converters
Redundancy Indicates the redundancy statuses of DC-to-DC converters 00 and
01.
Redundant: The converters are redundant.
[Non-redundant: Sufficient Resources]: The converters have
lost redundancy, but are sufficient for system operation.
[Non-redundant: Insufficient Resources]: The converters have
lost redundancy and are insufficient for system operation.
DDC#00 to DDC#01 DC-to-DC converter status:
OK: Operating normally
Not present: Not installed
Failed: Failure
Configuration error: Configuration error
Vo l t a g e
Sensor Voltage sensor type