Filter
Top Products
C122-E003-02EN 8-117
GSWB
8.2 Configuration Definition Commands
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: The specified [contact] is invalid.
Action: Enter a correct value.
8.2.17.4 snmp-server user
This command specifies a user to be connected from the server using SNMP v3.
Unless snmp v3 is used, no user need be specified. By default, no user is specified.
z Maximum number of users: 8
z DES is used for encrypting packets.
(1) Synopsis
• Specifies a user to be connected from a server using SNMP v3
• Deletes the specified user
snmp-server user <user> { rw | ro } { noauth | auth {md5 | sha}
<password> | priv {md5 | sha} <password> <passphrase>}
no snmp-server user <user>