Filter
Top Products
C122-E003-02EN 8-49
GSWB
8.2 Configuration Definition Commands
• Disables aging
• Resets the aging time to the default value
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: An invalid parameter was specified.
Action: Specify the correct parameter.
8.2.7.2 mac address-table static
This command adds and deletes MAC address table static addresses:
z MAC addresses registered statically cannot be deleted using "clear bridge." They
can be deleted using "no mac address-table static."
Switch(config)# mac address-table aging-time 100
Switch(config)#
Switch(config)# mac address-table aging-time 0
Switch(config)#
Switch(config)# no mac address-table aging-time
Switch(config)#