Filter
Top Products
C122-E003-02EN 8-245
GSWB
8.3 Operation Commands
(5) Examples
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.8 Log-related commands
8.3.8.1 clear logging error
This command deletes the stored error log contents.
(1) Synopsis
• Deletes the stored error log contents
(2) Options
None
(3) Command mode
enabled exec
Switch# clear spanning-tree
Switch#
clear logging error