Filter
Top Products
C122-E003-02EN 8-143
GSWB
8.2 Configuration Definition Commands
(5) Example
• Sets the IP address of the syslog transfer destination server to 172.16.22.44
(6) Error Messages
• Input parameter error.
Cause: An invalid IP address was specified.
Action: Enter the correct IP address.
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• Internal communication error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
• Input parameter error.
Cause: An invalid IP address was specified.
Action: Specify the correct IP address.
Switch(config)# logging host 172.16.22.44
Switch(config)#