8-50 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
z Up to 128 definitions can be registered. However, if the MAC address table has no
free space because of dynamic learning, defining the maximum number (128) of
static addresses may not be possible.
z No MAC address can be set for a broadcast address or multicast address, and no
ALL 0 MAC address or ALL F MAC address can be specified.
z Static MAC address entries have priority over dynamic ones.
z If the specified port-channel does not exist, no error occurs, but it is invalid. Each
item is enabled when it is created.
(1) Synopsis
• Adds a static address to the MAC address table
• Deletes a static address from the MAC address table
(2) Options
z <mac-address>
Station MAC address. A MAC address for a broadcast address or multicast address,
an ALL 0 MAC address, and an ALL F MAC address cannot be registered.
z <vlan-id>: Specifies the VLAN ID (1 to 4094) of the output port.
z {forward | discard}
- forward: Transfers frames to their destinations.
- discard: Discards frames of the specified destination.
z <interface-id>: Specifies the output port number.
- GigabitEthernet 0/1 to 0/8
- IOU 00 to 71
- TenGigabitEthernet 1/1 to 1/2
- port-channels 1 to 7
- ports 1 to 33
(3) Command mode
Global
mac address-table static <mac-address> vlan <vlan-id>
{forward interface <interface-id> | discard}
no mac address-table static <mac-address> vlan <vlan-id>