Filter
Top Products
C122-E003-02EN 8-107
GSWB
8.2 Configuration Definition Commands
(1) Synopsis
• Sets host or network conditions to allow remote connections
• Deletes the host or network conditions that allow remote connections
(2) Options
z {all | telnet | ssh }
Specifies the protocol.
- all: Specifies both telnet and ssh.
- telnet: Specifies telnet.
- ssh: Specifies ssh.
z {all | <ip-address> [<subnet-mask>]}
- all: Specifies all IP addresses.
- <ip-address> [<subnet-mask>]: Specifies the IP address or network address for
which remote access is permitted.
- <subnet-mask>: Specifies the subnet mask.
If the IP address of a specific host is specified in <ip-address>, the subnet mask
need not be specified. However, the subnet mask is required for a specific
network.
(3) Command mode
Global
(4) See also
telnet enable
ssh enable
show remote-access
remote-access {all | telnet | ssh } {all | <ip-address> [<subnet-mask>]}
no remote-access {all | telnet | ssh } {all | <ip-address> }