Filter
Top Products
8-42 C122-E003-02EN
GSWB
CHAPTER 8 CLI Operations
(3) Command mode
Interface
(4) See also
None
(5) Examples
• Enables broadcast storm control on a port and sets the upper limit to 10000 pkts/
sec
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: SynopsisInvalid character detected at '^' marker in the entered command
string
Action: Enter the command string correctly.
• Internal communication error.
Cause: SynopsisAn internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
Switch(config-if)# storm-control broadcast threshold 10000
Switch(config-if)#