Filter
Top Products
3-108 C122-E003-02EN
MMB
CHAPTER 3 Web-UI Operations
To apply the changes to settings made on this window, the partition needs to be
rebooted.
PCI Address Mode
(setting)
Specify a PCI address mode for a partition.
• PCI Bus Mode
• PCI Segment Mode
The specified mode is set when the partition is reset.
Interleave Mode
between SBs (current
status)
Indicates the SB-to-SB interleave mode that is currently effective.
• Enabled: If the configuration allows SB-to-SB memory
interleave, an interleave is performed. If the DIMMs are not
implemented to allow an SB-to-SB interleave, no interleave will
be performed even though [Enabled] is set here.
[Remarks]
This setting is used when high-performance processing is
required, such as by a research institute. Select Disable (default)
for normal uses.
• Disabled: No SB-to-SB memory interleave is performed.
Interleave Mode
between SBs (setting)
Guarantee of operation
Do not use this field. Doing so may lead to a malfunction and
result in data corruption or a device failure.
Mirror Mode (current
status)
Indicates the mirror mode that is currently effective.
Mirror Mode (Setting) Sets System Mirror.
Be sure to select System Mirror (Extended Mirror Mode).
Guarantee of operation
Do not use Standard Mirror Mode/Advanced Mirror Mode. Do
not use this field. Doing so may lead to a malfunction and result
in data corruption or a device failure.
Item Description