Filter
Top Products
C122-E003-02EN 8-265
GSWB
8.3 Operation Commands
(4) See also
wrr-queue cos-map
(5) Examples
• Displays output of show wrr-queue cos-map
z CoS Value
CoS value (always in a range of 0 to 7)
z Priority Queue
Queue ID of the CoS priority queue. This setting (range of 0 to 3) is for a CoS
value (range of 0 to 7).
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
Switch# show wrr-queue cos-map
CoS Value : 0 1 2 3 4 5 6 7
Priority Queue : 0 0 1 1 2 2 3 3
Switch#