Filter
Top Products
C122-E003-02EN 8-91
GSWB
8.2 Configuration Definition Commands
• igmp static exists.
Cause: The ip igmp snooping vlan static setting is enabled.
Action: Disable the ip igmp snooping vlan static setting, and reexecute the command.
8.2.12.3 ip igmp snooping vlan mrouter
This command specifies a multicast router port.
If a channel group is specified in <interface-id>, the anchor port is set as the multicast
router port.
(1) Synopsis
• Specifies a multicast router port
• Deletes a multicast router port
(2) Options
z <interface-id>
Specifies the interface and port number (GigabitEthernet 0/1 to 0/8, IO_Units 00 to
71, TenGigabitEthernet 1/1 to 1/2, port-channels 1 to 7, ports 1 to 33) to be set for the
router port.
(3) Command mode
VLAN configuration mode
(4) See also
ip igmp snooping
p igmp snooping vlan
(5) Examples
• Specifies an interface as a multicast router port of a VLAN
ip igmp snooping vlan mrouter interface <interface-id>
no ip igmp snooping vlan mrouter interface <interface-id>
Switch(config-vlan)# ip igmp snooping vlan mrouter interface
GigabitEthernet 0/1
Switch(config-vlan)#